The L44649 is a double-row tapered roller bearing that is widely used in various industrial applications due to its high load-carrying capacity, long service life, and reliability. This guide provides comprehensive information on the L44649 bearing, including its specifications, applications, benefits, installation guidelines, and troubleshooting tips.
The L44649 bearing is commonly used in a wide range of industrial machinery, including:
The L44649 bearing offers several benefits:
Story 1:
A maintenance technician at a paper mill struggled with frequent bearing failures in the gearboxes. Despite replacing bearings repeatedly, the issue persisted. Upon closer inspection, he realized that the bearings were being overloaded due to an improperly sized pulley. After correcting the pulley size, the bearing failures ceased.
What we learn: Pay attention to the root cause of bearing failures to prevent recurring problems.
Story 2:
A wind turbine operator noticed excessive vibration coming from one of the main bearings. The maintenance team lubricated the bearing, but the vibration persisted. Further investigation revealed a misalignment between the shaft and the bearing housing. After realigning the components, the vibration subsided.
What we learn: Proper alignment is crucial for optimal bearing performance and longevity.
Story 3:
A conveyor belt at a mining site experienced sudden bearing failure, causing a costly shutdown. The investigation team found that the bearing had become contaminated with abrasive coal dust due to inadequate sealing. By installing proper seals and implementing a regular cleaning schedule, the conveyor resumed operation without further bearing issues.
What we learn: Contaminant protection is essential to prevent bearing damage and ensure reliability.
1. Identify the need for a bearing: Determine the load, speed, and environmental conditions to select the appropriate bearing type.
2. Select the right bearing: Consider the bearing's specifications, load capacity, and size to match the requirements.
3. Install the bearing properly: Follow the recommended installation guidelines to ensure proper alignment and lubrication.
4. Monitor and maintain the bearing: Conduct regular inspections and lubrication to extend the bearing's lifespan.
5. Troubleshoot and resolve issues: If problems arise, consult with a bearing specialist or follow troubleshooting guidelines to identify and address the underlying cause.
Bearings play a critical role in industrial machinery, enabling smooth operation, power transmission, and load support. Proper selection, installation, and maintenance of bearings are essential for:
The benefits of proper bearing maintenance include:
Brand | Part Number |
---|---|
SKF | 32031 |
Timken | 22420 |
NSK | HAC-1629 |
FAG | 721001 |
Load Type | Value (kN) |
---|---|
Basic load rating (C0) | 22.5 |
Static load rating (C0) | 43.9 |
Dynamic load rating (Cr) | 28.7 |
Fatigue load limit (Cu) | 9.7 |
Dimension | Value (mm) |
---|---|
Inner diameter (di) | 40 |
Outer diameter (do) | 80 |
Width (B) | 18 |
Internal clearance (Cn) | 0.030 - 0.045 |
2024-08-01 02:38:21 UTC
2024-08-08 02:55:35 UTC
2024-08-07 02:55:36 UTC
2024-08-25 14:01:07 UTC
2024-10-19 01:42:04 UTC
2024-08-25 14:01:51 UTC
2024-08-15 08:10:25 UTC
2024-08-12 08:10:05 UTC
2024-08-01 02:37:48 UTC
2024-08-13 08:10:18 UTC
2024-08-01 17:09:45 UTC
2024-08-01 17:10:01 UTC
2024-08-02 14:30:43 UTC
2024-08-02 14:31:03 UTC
2024-08-03 15:39:21 UTC
2024-08-03 15:39:41 UTC
2024-08-04 18:22:55 UTC
2024-08-04 18:23:06 UTC
2024-10-21 01:33:07 UTC
2024-10-21 01:33:00 UTC
2024-10-21 01:33:00 UTC
2024-10-21 01:33:00 UTC
2024-10-21 01:32:59 UTC
2024-10-21 01:32:56 UTC
2024-10-21 01:32:56 UTC
2024-10-21 01:32:56 UTC