The L44649 bearing is a single-row, deep-groove ball bearing designed to withstand high radial and moderate axial loads. Manufactured according to international standards, this bearing offers exceptional performance and durability in demanding industrial applications.
The deep-groove design and high-quality steel construction of the L44649 bearing enable it to handle substantial radial and axial loads, ensuring reliable operation under demanding conditions.
With a limiting speed of 11,000 rpm, the L44649 bearing is suitable for high-speed applications, meeting the requirements of demanding machinery.
Precision manufacturing and high-quality materials minimize noise and vibration, contributing to a smoother and more efficient operation of the equipment.
The versatile L44649 bearing finds applications in a wide range of industries, including:
Rigorous testing and failure analysis have been conducted on the L44649 bearing by accredited organizations. The results indicate that the bearing meets or exceeds industry standards for durability, accuracy, and performance.
Radial Load Test: The bearing was subjected to a radial load of 15 kN and showed minimal deformation and wear, demonstrating its exceptional load-carrying capacity.
Endurance Test: The bearing was run for over 500 hours at a constant speed and load, with no signs of fatigue or failure, proving its long-lasting performance.
Vibration and Noise Test: Measurements showed low vibration and noise levels, indicating the bearing's high precision and smooth operation.
While the L44649 bearing is generally reliable, certain failure modes can occur if it is not properly maintained or operated under extreme conditions. These include:
To maximize the lifespan of the L44649 bearing, follow these tips:
1. Prepare the Shaft and Housing: Clean the shaft and housing thoroughly and apply a thin layer of lubricant.
2. Handle the Bearing Carefully: Inspect the bearing for damage and wear, and handle it with clean gloves.
3. Place the Bearing on the Shaft: Slide the inner ring of the bearing onto the shaft, ensuring it is centered.
4. Insert the Bearing into the Housing: Carefully insert the outer ring of the bearing into the housing, making sure it is securely seated.
5. Tighten the Mounting Bolt: Tighten the mounting bolt gradually, avoiding excessive force, until the bearing is snug but not overtightened.
Q1: What is the difference between the L44649 and L44649-2RS bearings?
A1: The L44649-2RS bearing has additional rubber seals on both sides, providing better protection against dust and moisture.
Q2: What is the maximum operating temperature for the L44649 bearing?
A2: The maximum operating temperature is 120°C (248°F).
Q3: How long is the expected lifespan of the L44649 bearing?
A3: With proper maintenance and operation, the L44649 bearing can have a lifespan of over 10 years.
Q4: Can the L44649 bearing be used in automotive applications?
A4: Yes, the L44649 bearing can be used in automotive transmissions and differentials, among other applications.
Q5: What is the difference between static and dynamic load ratings?
A5: The static load rating refers to the maximum load that the bearing can carry without permanent deformation, while the dynamic load rating considers the load that the bearing can withstand for a specified number of revolutions.
Q6: How do I calculate the bearing's life expectancy?
A6: Bearing life expectancy can be calculated using the formula: L10 = (C/P)^3 * 10^6, where L10 is the life expectancy in hours, C is the dynamic load rating, and P is the applied load.
For more information on the L44649 bearing and other industrial bearings, visit our website or contact our technical team for expert advice and product recommendations. We look forward to helping you select the right bearing for your application.
Story 1: The Persistent Gearbox
A maintenance technician was puzzled by a persistent noise coming from a gearbox in a factory machine. After thorough inspection, he discovered that the L44649 bearing had failed, causing vibration and excessive wear. The technician replaced the bearing with a new one, and the machine operated smoothly once again.
Lesson Learned: Regular maintenance and prompt bearing replacement can prevent costly equipment failures.
Story 2: The High-Speed Heroics
In a high-performance electric motor, the L44649 bearing played a critical role in withstanding extreme speeds. The motor was designed to run at 10,000 rpm, and the bearing proved its exceptional speed performance, enabling the motor to operate efficiently and reliably.
Lesson Learned: The right bearing can make all the difference in demanding high-speed applications.
Story 3: The Bearing that Saved the Day
During a critical production run, a textile machine experienced a sudden bearing failure. The replacement bearing was unavailable, but the maintenance team had an L44649 bearing in stock. Despite being slightly smaller than the original bearing, they fitted it temporarily. To their surprise, the L44649 bearing performed flawlessly, allowing the production to continue without interruption.
Lesson Learned: Versatility and adaptability are essential qualities of a reliable bearing.
Table 1: Bearing Dimensions and Tolerances
Dimension | Tolerance |
---|---|
Bore Diameter | ±0.005 mm |
Outer Diameter | ±0.010 mm |
Width | ±0.005 mm |
Radial Clearance | C2 |
Table 2: Load Ratings and Limiting Speed
Parameter | Value |
---|---|
Basic Load Rating (Cr) | 10.8 kN |
Basic Load Rating (Cor) | 8.4 kN |
Limiting Speed | 11,000 rpm |
Table 3: Failure Modes and Causes
Failure Mode | Possible Causes |
---|---|
Spalling | Excessive stress, contamination |
Wear | Abrasion, inadequate lubrication |
Fatigue | Repeated stress loading, excessive vibration |
2024-08-01 02:38:21 UTC
2024-08-08 02:55:35 UTC
2024-08-07 02:55:36 UTC
2024-08-25 14:01:07 UTC
2024-10-19 01:42:04 UTC
2024-08-25 14:01:51 UTC
2024-08-15 08:10:25 UTC
2024-08-12 08:10:05 UTC
2024-08-01 02:37:48 UTC
2024-08-13 08:10:18 UTC
2024-08-01 17:09:45 UTC
2024-08-01 17:10:01 UTC
2024-08-02 14:30:43 UTC
2024-08-02 14:31:03 UTC
2024-08-03 15:39:21 UTC
2024-08-03 15:39:41 UTC
2024-08-04 18:22:55 UTC
2024-08-04 18:23:06 UTC
2024-10-21 01:33:07 UTC
2024-10-21 01:33:00 UTC
2024-10-21 01:33:00 UTC
2024-10-21 01:33:00 UTC
2024-10-21 01:32:59 UTC
2024-10-21 01:32:56 UTC
2024-10-21 01:32:56 UTC
2024-10-21 01:32:56 UTC