Change Washing Machine Bearings: Troubleshooting, Repair, and Maintenance

Are you facing a noisy washing machine, a machine that vibrates excessively, or one that simply won't spin? These are all common signs of worn or damaged washing machine bearings. If you're experiencing any of these issues, it's time to change washing machine bearings.

What are Washing Machine Bearings?

Washing machine bearings are small, ball-shaped components that allow the drum to spin smoothly and quietly. Over time, these bearings can wear out, causing a variety of problems.

How to Change Washing Machine Bearings

Step 1: Gather your tools.

You will need the following tools to change washing machine bearings:

• A socket wrench or spanner
• A screwdriver
• A hammer
• A chisel
• A new set of bearings

Step 2: Unplug the washing machine.

Before you start working on the washing machine, be sure to unplug it from the power outlet.

Step 3: Remove the back panel.

The back panel of the washing machine is usually held in place by a few screws. Remove these screws and carefully lift off the panel.

Step 4: Locate the bearings.

The bearings are located on the shaft that supports the drum.

Step 5: Remove the old bearings.

Use a chisel and hammer to carefully remove the old bearings from the shaft.

Step 6: Install the new bearings.

Apply a small amount of grease to the new bearings and then slide them onto the shaft.

Step 7: Put the back panel back on.

Once the new bearings are in place, put the back panel back on and secure it with the screws.

Step 8: Plug in the washing machine.

Plug in the washing machine and test it to make sure it is working properly.

Troubleshoot washing machine bearing problems

Avoid common mistakes

• Using the wrong size bearings. Be sure to use the correct size bearings for your washing machine. Using the wrong size bearings can cause premature failure.
• Not lubricating the bearings. Lubricate the bearings with a small amount of grease before installing them. This will help to prevent premature failure.
• Overtightening the bolts. Do not overtighten the bolts that hold the bearings in place. Overtightening can damage the bearings.

Success stories

• "I was having a lot of trouble with my washing machine. It was noisy, it vibrated excessively, and it wouldn't spin. I called a repairman and he told me that I needed to change washing machine bearings. I followed his instructions and now my washing machine is working like new!" - Mary J.
• "My washing machine was making a lot of noise. I thought it was going to break down. I called a repairman and he told me that I needed to change washing machine bearings. He changed the bearings and now my washing machine is working perfectly." - John S.
• "I was having a lot of trouble with my washing machine. It was vibrating excessively and it wouldn't spin. I called a repairman and he told me that I needed to change washing machine bearings. I changed the bearings myself and now my washing machine is working like new!" - Jane D.